Medical laser pioneer since 1987ISO 13485 · ISO 9001
Ligenesis 镭健科技
  • Home
  • Products
  • Verify product
  • Service
  • Contact
  • Technology
Partner with us
Ligenesis 镭健科技
Ligenesis 镭健科技

Advance clinicians’ skills, reduce patient pain and lower the cost of care.

Since 1987, Ligenesis has translated medical-laser research into practical clinical systems.

Contact

  • Room 501, Xinte Optoelectronic Industrial Building, Wuhan East Lake High-tech Development Zone
  • 027-87180270
  • LJ@ligenesis.com.cn
Products
  • View all
Solutions
  • Women's health and aesthetics
  • Respiratory medicine
  • Urology
© 2026 Wuhan Ligenesis Technology Co., Ltd.鄂ICP备17005967号-1
Back to products

Laser aesthetics

1064 / 532 NM · Q-SWITCHED

Nd:YAG / KTP Q-switched Laser Aesthetic System

A dual-wavelength 1064/532 nm system for deep and superficial pigment and tattoo treatment, with PTP, 300 ns quasi-long-pulse and Qplus modes.

NMPA registration: 20213092500

Enquire about this system
Nd:YAG KTP Q-switched laser aesthetic system

Precise · Safe · Efficient

Dual wavelength

1064 / 532 nm

Pulse width

≤ 20 ns

Repetition rate

1–10 Hz

Spot diameter

1–10 mm

Product overview

A system shaped around clinical needs

The deeper-reaching 1064 nm wavelength addresses dermal pigment and dark tattoos, while 532 nm concentrates energy near the surface for red tattoos, freckles and superficial pigment. A 2–10 mm zoom collimating handpiece and flat-top beam distribute energy evenly without local hot spots.

Deep dermal pigment

For nevus of Ota, dermal pigmented lesions and dark tattoos.

Superficial pigment

For freckles, café-au-lait spots, lentigines and superficial pigmentation.

Tattoo treatment

Dual wavelengths target black, blue and red tattoo pigments.

Skin rejuvenation

The 300 ns quasi-long pulse supports brightening, pore tightening and fine-line improvement.

Core technology

Zoom collimation and a flat-top beam profile

The handpiece adjusts continuously from 2–10 mm and emits collimated parallel light at 8 mm, with parameters configured automatically as spot size changes. A flat-top profile distributes energy evenly to fragment pigment while protecting normal tissue.

01

PTP mode

Delivers two 4–10 ns pulses at a 170 μs interval with up to 1600 mJ output.

02

300 ns quasi-long pulse

Uses photothermal action to support collagen remodelling, brightening, pores and fine lines.

03

Qplus mode

Releases high peak power to fragment pigment while limiting damage to surrounding tissue.

Technical parameters

Key specifications at a glance

Products are continuously improved. Final configuration and specifications are subject to registration and delivery documents.

Maximum terminal energy
1200 mJ ±20% at 1064 nm; 600 mJ ±20% at 532 nm
Energy density
37.9–63.7 J/cm² at 1064 nm; 18.9–31.8 J/cm² at 532 nm
Aiming beam
650 nm ±10 nm, power < 5 mW
Cooling
Fully closed distilled-water cooling system

Clinical and business enquiries

Find the right system for your department and workflow

Contact Ligenesis